Need help?Do you have a question about the Belkin F7D7606 NetCam HD+ and is the answer not in the manual?
General| Type | IP Camera |
|---|---|
| Video Resolution | 1280 x 720 |
| Night Vision | Yes |
| Audio | Yes |
| Built-in microphone | Yes |
| Connectivity | Wi-Fi |
| Wi-Fi Standard | 802.11n |
| Resolution | 1280x720 |
| Lens | Fixed |
| Mobile App | Belkin NetCam App |
| Cloud Storage | Yes |
| Features | Motion detection |
| Storage | MicroSD card support |
| Power | AC adapter |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
Download the latest Belkin NetCam app from the App Store or Google Play Store.
Plug in the NetCam HD, turn the switch to the camera icon, and wait for a blinking amber light.
Connect your device to the Wi-Fi signal created by NetCam HD to confirm connection.
Launch the NetCam app and press 'Yes' on the Belkin NetCam pop-up to start the setup process.
Once setup is completed, set the switch on the camera to the desired position.
Tap on a camera's name within the app to view its feed.
Tap the gear icon next to a camera name to access its settings page.
Icons indicating camera sharing status, cloud connectivity, and operational errors.
Visit belkin.com/netcam and log in with your username and password.
View camera feeds, clips, and settings through a web browser interface.
Unscrew the camera post from its base and remove the weight for wall mounting.
Attach screws to the wall and then hang the mounting plate onto the screws.
Align the camera base with the wall plate and screw the camera post securely.
Statement of compliance with FCC rules for electromagnetic compatibility.
Information on FCC radiation exposure limits and compliance requirements.
Compliance statement for Canadian ICES-003 and RSS-210 standards.
Details on Industry Canada approval for the radio transmitter and antenna restrictions.
To Next Page