N1 Wireless Modem-Router
Quick Installation Guide
Hardware Connections:
Use the instructions in
this Guide to connect your
Modem-Router.
Automatic Configuration:
Insert the CD into your
computer and follow the
on-screen instructions.
Connect other Computers:
The CD can assist you in
connecting other computers
to your new network.
Step 1 - Hardware Connections
A
Place the Modem-Router next to the computer.
Raise the Modem-Router’s antennas.
B
Find your new networking cable (it came in the box
with your Modem-Router) and connect it to the yellow
port on the back of the Router.
C
Find your new telephone cable (it came in the box with
your Modem-Router) and connect it to the grey port on
the back of the Modem-Router.
Connect the other end to your telephone socket on the
wall.
To Next Page
