To Next PageTo Next PageWhat to do if network clients can't connect to Belkin N600 DB?
If some of your network clients are unable to connect to the Belkin Wireless Router, ensure that all clients are using the correct network name and password to connect wirelessly. Locate the network settings on each client, select the network name displayed on the card from the available networks, and enter the password when prompted.
What to do if Belkin Wireless Router network name is not listed?
If you can't connect to the internet wirelessly and your Belkin Wireless Router network name isn't listed, first verify that your Router is powered on and the front-panel light is solid blue. If you are far from the Router, move closer to ensure you are within range. If the issue persists, connect a computer to the Router via a network cable, go to http://router/ and ensure that “Broadcast SSID” is turned ON.
Why is my printer not showing up when plugged into Belkin N600 DB?
If a printer plugged into the USB port of your Belkin Wireless Router is not showing up on your computer, try unplugging and re-plugging the printer to ensure the USB connector is firmly connected. Also, ensure that the printer's driver is installed on your computer. Via the Belkin Router Manager, open the USB Print and Storage Center and check that the printer appears in the list of available devices. View the printer's properties and ensure that “auto-connect” is selected.
How to set up WPA security on Belkin N600 DB?
To set up WPA security on your Belkin Wireless Router, log in to your Router by visiting http://router/ in your web browser. Click “Wireless” in the left-hand menu, then click “Security”. Select the “WPA/WPA2” option. Enter a password (8–63 characters, including spaces and punctuation, or a 64-digit hexadecimal number). Click “Apply Changes” to finish. If configuring over wireless, reconnect after changing security settings. If older computers can't connect, try 128-bit or 64-bit WEP, or seek software updates from their manufacturers.
What to do if USB device is not showing up on Belkin Wireless Router?
If a USB device (other than disks and printers) plugged into your Belkin Wireless Router is not showing up on your computer, it must be accessed via the USB Print and Storage Center. Check if the light is on over the USB port; if not, try unplugging and re-plugging the device. Via the Belkin Router Manager, open the USB Print and Storage Center, check that the device appears in the list of available devices, select the device, and click the “Use” button.
How to set up WEP security on Belkin N600 DB?
To set up WEP security on your Belkin Wireless Router, log in to your Router by visiting http://router/ using your web browser. Click “Wireless” in the left-hand menu and then click “Security.” Select the “128-bit WEP” option. You can type in a WEP key manually or generate one from a passphrase. Click “Apply Changes” to finish. If configuring the Router over a wireless connection, you will have to reconnect to the Router after changing any security settings. If your older computers cannot connect to your network, try 64-bit WEP.
Why is disk not showing up on Belkin Wireless Router?
If a disk you plugged into the USB port of your Belkin Wireless Router is not showing up on your computer or in Memory Safe, and the light on over the USB port is off, try unplugging and re-plugging the disk, ensuring the USB connector is firmly plugged into the Router. If your disk has an optional power supply, use it while the disk is attached to your Router. The Router supports FAT16, FAT32-, or NTFS-formatted disks; disks in other formats will not appear.
What to do if disk plugged into Belkin N600 DB Wireless Router is not coming on?
If a disk plugged into the USB port of your Belkin Wireless Router is not coming on or remains on only for a short time, it might require more power than the router’s USB port provides. If your disk has an optional power supply, please use it while the disk is attached to your Router.
Why is my Belkin Wireless Router performance slow?
Slow or inconsistent wireless network performance, weak signal, or difficulty maintaining a VPN connection on your Belkin Wireless Router can occur because the distance between devices increases. Try temporarily moving the computer within 10 feet of the Router, if possible. You may also improve performance and reliability by changing the wireless channel, depending on local wireless traffic and interference.
General| Frequency Bands | 2.4 GHz, 5 GHz |
|---|---|
| Ports | 4x 10/100 Ethernet LAN, 1x 10/100 Ethernet WAN |
| USB Ports | 1x USB 2.0 |
| Security | WPA, WPA2, WEP |
| Antennas | Internal |
| Wireless Standard | 802.11a/b/g/n |
| Max Data Rate | 300 Mbps (2.4 GHz), 300 Mbps (5 GHz) |
