Getting To Know Your 2 slice Toaster
Product may vary slightly from illustrations.
Before Using For The First Time
There may be manufacturing residue or oil remaining in the toaster or heating element, which might emit an
odor at the time of the rst use. This is normal and will not occur after several uses. It is suggested to operate the
toaster without bread for rst toasting cycle according to the below steps. Then let the unit cool down before you
start toasting the rst slice.
How To Use The Toaster
1. Ensure the toaster is connected to the main power supply.
2. Place one to two slices of bread into the toasting slots and press the loading lever down until it latches.
The toaster will heat up automatically and start toasting.
NOTE: the toaster must be connected to the main power supply in order for the bread carriage to engage
and for the toasting cycle to begin
3. Adjust the browning control to brown the toast to your desired taste.
4. To stop toasting press the CANCEL button at any time.
5. The loading lever will rise automatically when toasting is nished. This toaster is equipped with a high lift
lever to help with the removal of smaller items.
6. If the toast is not dark enough, you can toast the bread again. Adjust the browning control to your desired
setting setting and replace the toast. Ensure the toast does not burn while re-toasting.
Loading lever
Cancel button
Bagel button
Browning control
Defrost button
4
SO-310754 LINEA 2 slice Toaster IM.indd 4 2013-10-11 12:13 PM
To Next Page
Loading...
Need help?
General
