Bella 5 QT. User Manual

GETTING TO KNOW YOUR STAINLESS STEEL CHAFING DISH
Product may vary slightly from illustration.
BEFORE USING FOR THE FIRST TIME
1. Carefully unpack the Chafing Dish and remove all packaging and materials.
Remove any labels from the stainless steel surface.
2. Set the Chafing Dish base on a dry, clean and flat surface.
3. Place the Chafing Dish into the base; then add 2 cups water to the Chafing Dish.
Add the lid.
4. Plug the cord into a 120 V AC electrical outlet.
5. Turn the temperature control dial to HIGH. Allow the Chafing Dish to heat for 10 minutes.
NOTE: When the Chafing Dish is heated for the first time, it may emit slight smoke
or odor. This is normal and should disappear. This will not affect the safety
of the appliance.
6. Using a protective oven mitt or potholder, grasp the lid and set aside. Discard the water.
Rinse and dry, add lid and store until ready for use.
4
LOW
OFF
MEDIUM
HIGH
Figure 1
Chafing Dish Lid
Lid Handle
Chafing Dish
Handles
Stainless Steel
Chafing Dish
Stainless Steel
Chafing Dish
Base
Chafing Dish
Base Handles
Temperature
Control Dial
Power-Supply
Cord with
3 Prong Plug
Non-Skid Feet
SO-307700_13423 BELLA 5 qt Electric Chafing Dish IM_Layout 1 11-04-28 5:45 PM Page 4

Bella 5 QT. Specifications

General

Brand	Bella
Model	5 QT.
Category	Kitchen Appliances
Language	English