EasyManua.ls Logo

Bella LINEA - Plasticizer Warning; Electric Power Requirements; Changing the Fitted;Moulded Plug

Bella LINEA
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Plasticizer Warning
CAUTION:
To prevent Plasticizers from migrating to the nish of the counter top or
table top or other furniture, place NON-PLASTIC coasters or place mats between the
appliance and the nish of the counter top or table top. Failure to do so may cause the
nish to darken; permanent blemishes may occur or stains can appear.
Electric Power
If the electrical circuit is overloaded with other appliances, your appliance may not
operate properly. It should be operated on a separate electrical circuit from other
appliances.
Changing the Fitted/Moulded Plug
Should the need arise to change the tted/moulded plug, follow these instructions:
Mains (AC) Operation. This unit is designed to operate on 220V current only.
Connecting to other power sources may damage the unit.
Connect three-pin plug as follows:
The wires in this mainslead are coloured in accordance with
the following code:
Green/Yellow = Earth
Blue = Neutral
Brown = Live
L
Live
E
Earth
N
Neutral
4

Related product manuals