Before first use
Before you use the steriliser for the first time, clean it thoroughly as
described below.
1. Remove the basket from the base.
2. Fill a baby bottle or a measuring cup with exactly 200ml tap water and
pourthis intothe base(Fig.2).
The amount of water needs to be exactly 200mI.When the base contains
too much water, the items will not be sterilised properly. When the base
does not contain enough water, this can cause damage to the steriliser or
microwave.
3. Placethe basket inthe base.(Fig.3)
4. Put the lid on the steriliser (1) and push down the clips to lock the lid into
place (2).(Fig.4)
5. Placethe steriliser in the microwave. (Fig.5)
Note: Make sure that the microwave is clean and dry before you start
sterilising.
Note: If you have a combination oven, make sure that the oven or grill is
switched off and has cooled down before you put the steriliser in it.
6. Select the appropriate microwave wattage and time (see the table in
chapter"Usingthe microwavesteriliser")and letthe microwaveoperate.
7. After the microwave has finished, open it and let the steriliser cool down
before you remove it from the microwave.
8. Pullopen the clips (1) and remove the lid (2)
9. Pour out the remaining water and rinse the base and basket thoroughly.
To Next Page
Loading...