Preparing for use
Filling the basket
Before you put the items to be sterilised in the basket, clean them thoroughly
in the dishwasher or clean them by hand with hot water and some washing-
up liquid. Make sure you remove all milk residues.
Note: Make sure all items to be sterilised are completely disassembled and
place them in the basket with their openings pointing downwards, to prevent
them from filling with water.
Note: Do not stack the items too closely together.The steam has to be able
to circulate around the items to ensure effective sterilisation.
There are several ways to fill the basket:
Four feeding bottles
go
1. Placethe bottles upside down in the bottle cavities.
2. Place the teats in the teat cavities.
3. Placethe screw rings loosely on top of the teats.
Note: Larger screw rings only fit if placed in slanted position over the teats.
4. Placethe dome caps in the dome cap holders.
Two large feeding bottles (330mI/110z)
1. Insert the rim of the bottles into the slots for large bottles.
2. Place the teats in the teat cavities.
3. Placethe screw rings loosely on top of the teats.
Note: Larger screw rings only fit if placed in slanted position over the teats.
4. Placethe dome caps in the dome cap holders.
Four storage cups and lids
1. Placethe storage cups upside down in the basket.
2. Placethe lids vertically around the bottles.
To Next Page
Loading...