Instructions of installation and usage
Instructions of Installation and Use
MT-RT1802
Massage Bathtub
Cleaning&Maintenance
1. During the transportation or installation, do not pull the pipe or hold to avoid the
water leakage.
,
2. After long time use, if there are some dirt on product s surface, wipe it off gently by a soft
towel stained with mild detergent; for the metal parts, polish it with some car wax by a towel,
which brings out a refreshing appearance.
3. Scale deposit can be wiped off with warm citric acid or vinegar by a soft cloth.
,
4. Don t clean the tub and with hard or coarse material to avoid any scratches.
,
5. Don t clean the tub and with gasoline to avoid any damages.
6. It is not recommended to leave water in the tub for a long time or use this tub for washing
purpose. Pls drain off the water after the bath and dissconnect the power supply.
7. There should be sufficient power supply and wires should be safely grounded.
8. For your safty, a professional technician is necessary to ensure earthing wire be well grounded
and a RCCB fitted during installation.
accessories
accessories
accessories
To Next Page
Need help?
General
