To Next PageTo Next Page
Need help?Do you have a question about the Bell&Howell AUTOLOAD FILMOSOUND 2585 and is the answer not in the manual?
Provides an overview of the service manual's scope and content.
Details variations and features across different projector models.
Explains the film threading and guidance system of the projector.
Outlines essential safety and procedural guidelines before repairs.
Specifies methods for cleaning projector components and film path.
Details lubrication points, types, and application methods.
Provides general guidelines for component accessibility and replacement.
Step-by-step instructions for replacing projector fuses.
Procedures for replacing projection and exciter lamps.
Provides precautions for component reassembly and part handling.
Details the steps for removing the projector's rear cover.
Step-by-step guide for replacing the projector's drive belt.
Instructions for removing the top cover and carrying handle.
Procedure for replacing the internal projector speaker.
Guide for removing the front and rear end caps.
Instructions for servicing and repairing the projector blower.
Steps for replacing the projector's main power switch.
Procedure for removing and replacing the drive motor.
Instructions for replacing the power and lamp transformers.
Guide for removing and replacing the rear reel arm assembly.
Procedure for replacing the front reel arm assembly.
Details repair and adjustment of still-run and animation clutch linkages.
Instructions for repairing the audio amplifier and associated controls.
Procedure for removing and replacing the soundhead assembly.
Guide for removing and reinstalling the main mechanism assembly.
Outlines procedures for disassembling individual mechanism parts.
General guidance and recommendations for performing adjustments.
Procedures for aligning the projector's optical system.
Steps for adjusting the intermittent mechanism for proper operation.
Procedure to check and adjust shuttle tooth height for film gate clearance.
Guide for checking and adjusting shuttle stroke for proper film movement.
Procedure for adjusting the still-run clutch mechanism.
Instructions for adjusting the lens carrier for optimal focus.
Comprehensive guide for adjusting all aspects of the sound system.
Procedure for aligning the photocell for optimal sound pickup.
Guide for adjusting stabilizer rollers for smooth film tracking.
Instructions for adjusting the optical slit for sound clarity.
Methods and procedures for checking projector operating speed.
Describes various devices and techniques for measuring projector speed.
Ensuring adequate clearance between lamp cover and sound drum.
Adjusting tension for smooth engagement of forward/reverse gears.
Procedure for adjusting backlash in idler gear mechanisms.
Detailed breakdown of the 20-watt amplifier circuit stages.
Addresses common issues not fitting other categories.
Diagnoses and solutions for common picture quality problems.
Troubleshooting for issues related to film movement and handling.
Addresses problems with the automatic film threading system.
General| Brand | Bell&Howell |
|---|---|
| Model | AUTOLOAD FILMOSOUND 2585 |
| Category | Projector |
| Language | English |
