Need help?Do you have a question about the BellaVista 1000 and is the answer not in the manual?
General| Model | BellaVista 1000 |
|---|---|
| Category | Medical Equipment |
| Type | Ventilator |
| FiO2 | 21-100% |
| Display | Touchscreen |
| Parameters | Pressure, Volume, Flow |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Ventilation Modes | SIMV, CPAP |
Information on sending the device for repair and contact details for issues.
Identifies the specific bellavista models covered by this manual.
Illustrates front and rear views, identifying key external components.
Details the various connectors available on the device's side panels.
Outlines weekly, monthly, and bi-annual maintenance activities.
Specifies checks and calibrations required for yearly maintenance.
Steps to prepare a USB stick and gather device information for upgrades.
Instructions for installing the new software version onto the device.
Provides solutions for common problems encountered during software upgrades.
Explains how to log into the device's service menu using a password.
Details screens displaying device software versions and ADC values.
Covers screens for sensor readings and calibration procedures.
Outlines the scope, validity, and required materials for shipment testing.
Procedures for resetting user data and performing visual inspections.
Describes functional testing and FiO2 oxygen cell calibration.
Lists tasks and required materials for annual servicing.
Details replacing O2 cells and filter mats during maintenance.
Steps for accessing service level and exchanging the backlight inverter.
Instructions for setting up the FlowAnalyser for calibration.
Details on performing zero pressure and pressure gain calibration.
Outlines test scope and the insulation resistance measurement.
Details high voltage, leakage, and housing current tests.
Describes how to measure patient leakage and auxiliary currents.
Steps to verify ventilation parameters and monitoring functions.
Procedures for testing the device's alarm system functionality.
Information on device passwords and how to download diagnostic log files.
Step-by-step instructions for replacing O2 sensors and filter mats.
Procedures for replacing the battery and O2 inlet filter.
Lists alarms related to calibration errors and FiO2 mismatches.
Covers alarms for high device and blower temperatures.
Lists common spare parts with their article numbers and designations.
Details specific technical components like boards, valves, and sensors.
To Next Page