Bellco Pachislo - Error Messages; E-0; (CE;CJ); E-1; (HE;HJ); E-2; (HE;HJ)

10
Copyright © 2005 Stealth Home Amusement all rights reserved.
Error Messages
When your machine has a problem, it indicates it with an error message. Error codes are the
following:
E-0/ (CE/CJ)
A token slot is
jammed.
Push the button at the token slot.
E-1/ (HE/ HJ)
A hopper is
jammed.
Turn off your machine, remove the hopper and take
out all the tokens.
E-2/ (HE/ HJ)
Hopper
dysfunction.
Check the hopper.
E-3/ (HE/ HJ)
A hopper is
empty.
Refill the hopper.
E-4/ (RR)
RAM error. Push the reset button.
E-5
Reel error. Restart the machine and push the reset button.
E-6/ (CO)
Prize error. Push the reset button.
E-7
Hopper
Overload.
Check the hopper.
E-8
Hopper
disconnected.
Check the cable.
CE/ CJ/ C2
A token slot is
jammed.
Need to be cleared and clean with alcohol. Then,
press the reset button.
Note 1: The reels on most Bellco models have a high pitch noise while they are spinning. This
is normal for this model machine.