To Next PageTo Next Page
Need help?Do you have a question about the Belleze 050-HA-50117 and is the answer not in the manual?
Use extreme caution when handling the glass front panel to prevent personal injury or damage.
Check air intake/exhaust, keep combustibles away, and plug into a grounded socket.
Product must be grounded via a three-wire cord; never use extension cords.
Improper grounding risks shock; do not modify plug or use bypass devices.
Turns the unit on and off; includes an automatic shut-off for overheating.
Cycles through flame levels (High, Medium, Low, OFF) and log glow effects.
Turns the heater function on and off, automatically setting flame to high.
Mirrors control panel functions with an effective range of up to 13 ft.
Instructions for installing or replacing the CR2025 battery in the remote control.
Dispose of batteries properly and do not ingest; seek medical help if swallowed.
Turn off/unplug unit, allow to cool, use vacuum/damp cloth; avoid abrasive cleaners.
Includes a 1-year warranty and encourages product registration for extended coverage.
Contact for replacements if product is not up to standard or arrives damaged/missing parts.
This document describes the Belleze 18" Insert Fireplace Heater, model 050-HA-50117, a modern home décor appliance designed to provide warmth and aesthetic appeal. The fireplace heater is intended for indoor use and is not suitable for outdoor environments or areas prone to water exposure like bathrooms or laundry rooms.
The Belleze fireplace heater serves as a supplemental heating source and a decorative element, featuring realistic flame effects. It operates by drawing in air, heating it, and then expelling warm air into the room. The unit incorporates a thermostat limiter that automatically shuts off the heater if the internal temperature becomes too high, preventing overheating and potential damage or fire hazards.
The appliance is equipped with both a control panel located on the top right corner of the unit and a remote control for convenient operation. Users can power the unit on and off, adjust the flame effect levels, and control the heater function. The flame control offers multiple settings: Medium flame with logs glow, Low flame with logs glow, OFF, and High flame with logs glow. When the heater is activated, the flame effect automatically defaults to the highest mode.
For safety, the unit requires a properly grounded 120V, 60Hz power source. It comes with a 6ft (1.8m) three-wired cord and should always be plugged directly into a wall outlet/receptacle. The use of extension cords or reloadable power taps is explicitly prohibited to ensure safe operation and prevent electrical shock or fire. The grounding feature is critical for reducing the risk of electric shock in case of malfunction.
Before using the fireplace heater, it is essential to ensure that the air intake and exhaust vents are clear and unobstructed. Combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains must be kept at least 3 feet (0.9m) away from the front, sides, and rear of the heater to prevent fire.
The control panel and remote control offer intuitive operation. The power button turns the unit on and off. The flame control button cycles through different flame effect levels, allowing users to choose their preferred ambiance. The heater control button activates or deactivates the heating function.
When handling the unit, especially during assembly or relocation, caution is advised due to the glass front panel. The top center of the fireplace can become hot to the touch when the heater is in use, posing a risk of serious injury or burns. Therefore, small children should always be supervised around the fireplace/heater, and no cloth or decorations should be placed over the heater outlet or fireplace, as this can obstruct airflow and cause a fire.
The remote control has an effective range of up to 13 feet and operates with a CR2025 battery. Before initial use, a plastic insulating sheet must be removed from the battery compartment. Battery replacement involves pushing a clip and pulling out the battery bracket, then inserting a new CR2025 battery with the button side facing up. It is recommended to remove the battery from the remote control if the unit will not be used for an extended period. Used batteries should be disposed of at a suitable recycling point according to local regulations, and ingestion of batteries should be avoided.
Regular care and maintenance are crucial for the longevity and safe operation of the Belleze fireplace heater. Before any cleaning or maintenance, the unit must always be turned off and unplugged from the power outlet. It should also be allowed to cool down completely to prevent burns.
To remove accumulated dust, a vacuum cleaner or duster can be used regularly on the unit. For cleaning the surface, a damp soft cloth is recommended, followed by buffing with a dry cloth. Abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface should not be used.
Troubleshooting guidance is provided for common issues. If the unit does not turn on, users should verify that it is plugged into a standard 120V grounded power source and press the power button on the control panel. If the flame effect is absent while the unit is on, checking if the flame spindle has fallen off from the spindle motor by opening the top and back panel is advised. If the heater does not blow warm air, ensure the set temperature is higher than the room temperature. For a non-functional heater, all switches should be turned to OFF, the unit unplugged for 5 minutes, and then plugged back in and operated normally. An "Error Code 88" on the indicator suggests resetting the unit by unplugging it for 5 minutes and then plugging it back in. If the remote control is not working, users should try using it closer to the unit, changing the battery, or removing any insulating plastic sheet.
The product comes with a 1-year warranty from the date of purchase, covering damaged or missing parts. Belleze encourages customers to register their product on their website for an extended warranty. For replacement parts or any issues, customer support can be contacted via phone or email.
General| Model | 050-HA-50117 |
|---|---|
| Category | Indoor Fireplace |
| Type | Electric Fireplace |
| Fuel Type | Electric |
| Power Source | Electric |
| Voltage | 120V |
| Flame Effect | Yes |
| Adjustable Thermostat | Yes |
| Remote Control | Yes |
| Overheat Protection | Yes |
| Color | Black |
| Material | Metal, Glass |
| Heating Capacity | 400 sq ft |
| BTU | 5000 BTU |
