EasyManua.ls Logo

Belling BIMW60 - Installation Instruction; Electrical Connection; Built-in Furniture Requirements

Belling BIMW60
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation Instruction
Please Read the Manual Carefully Before Installation
Please Note
Electrical connection
The oven is fitted with a plug and must be only connected to a properly installed earthed
socket. In accordance with the appropriate regulations, the socket must only be installed and
the connecting cable must only be replaced by a qualified electrician.
If the plug is no longer accessible following installation and all-pole isolating switch must
be present on the installation side with a contact gap at least 3mm.
A. Built-in furniture
The built-in cabinet shall not have a rear wall behind the appliance.
Minimum installation height is 85cm.
Do not cover ventilation slots and air intake points.
BOTTOM BRACKETS
SCREW C
SCREW A
ADJUST SCREW B
TRIM-KIT PLASTIC
COVER
min
550
450
600
+8
+2
560
(45)
(45)
9

Related product manuals