Page 4 19-461’02 Rev. D September 2017 RFM300-T
Instrument overview
The RFM300-T Series Refractometer is a self-contained easy to use
instrument suitable for measuring the refractive index of samples in
demanding factory environments as well as for use as a primary quality
control tool.
The instrument is housed in a case which is light in weight whilst being
extremely rugged. The ergonomic design ensures spills are dealt with by
the sloping of the case and the PEEK spill barrier and stainless steel
prism dish gasket ensure high resistance to chemical attack from the
majority of commonly used samples. The large sampling area on the
prism surface allows measurements of not only homogenous fluids like
juices, sodas and edible oils but also difficult to read samples like fruit
pulps and industrial resins.
Sample temperature is controlled by the Peltier Temperature control
system and intelligent temperature management which enables rapid
stabilisation and little noise. The low profile sample dish and non-contact
presser makes sample application and cleaning easy.
A high definition, capacitive touchscreen display facilitates operation in
factory environments, even when operated whilst wearing gloves, and the
GUI helps the operator quickly manoeuvre through the user and
configuration menus. On-screen graphical prompts support simple
operation such as method loading, calibration and routine maintenance.
The instruments conform to a number of industry measurement
standards and offer operational features that allow use in an environment
controlled by FDA regulation 21 CFR Part 11. Built in RFID technology
helps provide clearance and a log of operator and configuration functions.
Readings can be printed via USB, serial or network ports. Alternatively
they can be stored in a database or as secure PDFs to later download via
either a USB removable storage device or across a local area network.
A wide range of accessories including printers, barcode readers and USB
keyboards is available.
To Next Page
Loading...
