Bellini BTMF405 - Changing the paddle; Paddle Interchangeability; Frothing and heating milk; Step-by-Step Frothing and Heating

6
Changingthepaddle
Thepaddlesaresmallandareeasyto
interchange.Justholdtheringatthetop
ofthepaddletoliftitup.Donotapplyany
forcetothebaseofthepaddle.Failing
to take appropriate care will damage the
appliance.
I. Frothing and heating milk
1. Placetheapplianceonaatsurface.
2. Openthelid,selectthefrothingpaddle
and insert it onto the shaft inside the milk
container.
3. Fillthemilkcontainerwiththedesired
amountofmilkupto150ml,andthen
replace the lid and ensure it is properly
closed.
Caution:Themaximummilkquantity
permittedis150ml.Toavoidmilk
overowingwhilefrothing,DONOTllthe
milkoverthemaximumlevel
.Overllingthemilkfrothermayresultin
electric shock, personal injury or damage
tothisapplianceorproperty.
4. Placethemilkcontaineronthepower
baseandconnecttheplugintoapower
outlet.
5. PresstheFrothing&Heatingbutton,the
indicator will light red and the appliance
startstowork.Theapplianceswitches
off automatically when the temperature
ofmilkreaches60±10°C.Theheating
element stops heating and the frothing
paddlestopsrotating.Theindicatorlight
turnoff.
6. Note:Donotopenthelidwhileoperating.
During operation, you can stop operating
bypressingtheFrothing&Heatingbutton.
Theindicatorlightturnoff.
7. Whentheappliancehasstopped
operating, you can lift the milk container
fromthePowerbase,andthenopenthe
lid and pour out the warmed and frothed
milk.
Caution:
• Warmedmilkcancauseseriousburns.
Takecarewhenpouringthemilkfromthe
milk container as warmed milk may result
inscalding.
• Switchtheunitoffforatleast3minutesto
allowittocooldownbeforeresuminguse.
8. Themilkcontainermaybestoredonthe
powerbasewhenitisnotinuse.Butmake
surethepowercordisunplugged.
Note: Always disconnect the power
supply when it is not in use.
II. Frothing milk (Cool)
1. Placetheapplianceonaatsurface.
2. Openthelid,selectfrothingpaddleand
insertitontotheshaftofmilkcontainer.
3. Fillthemilkcontainerwiththedesired
amountofmilkupto150ml,andthen
replace the lid and ensure it is properly
closed.
Caution:Themaximummilkquantity
permittedis150ml.Toavoidmilk
overowingwhilefrothing,DONOTllthe
milkoverthemaximumlevel
.Overllingthemilkfrothermayresultin
electric shock, personal injury or damage
tothisapplianceorproperty.
4. Placethemilkcontaineronthepower
baseandconnecttheplugintoapower
outlet.
5. PressingtheFrothingbutton,theindicator
lightsblue.TheFrothingpaddlebegins
torotate.Theapplianceswitchesoff
automaticallyafter120s±10s.Themixing
paddle stops rotating and the indicator
lightturnoff.