Bellini BTPRC250 - Pressure Cooking: Soup and Chicken; Soup Cooking Guide; Chicken Cooking Guide

12
Soup
• Follow the steps in “preparations before
cooking”.
• Turn the pressure regulator to “CLOSE” position.
• Insert the connector of power cord to the
socket of the pressure cooker and put the plug
into to the wall power outlet. Switch Power
outlet on, the appliance is now in Standby
Mode.
• Press SOUP button, the Soup cooking indicator
will illuminated. The default pressure keeping
time “0025” appears on LED Display and start
to ash, “25” indicators the pressure keeping
time is 25 minutes.
• Within 8 seconds after pressing the Soup
button,
- You can press + or - buttons to set a different
pressure keeping time if you prefer an
alternative cooking time (The adjustment time
range is 15-40 minutes).
- You can also press Timer and + or – buttons to
set the delayed cooking time. (refer to “Setting
the timer” section)
Note: If no button is pressed within 8 seconds,
the appliance activates the selected mode
automatically.
• The cooking process will start automatically
after 8 seconds ashing time or preset timer
has elapsed.
• During cooking, the appliance will beep 1 time
when the working pressure is reached and the
pressure keeping time will start counting down.
• When the pressure keeping time has elapsed,
the electric pressure cooker will beep 5 times
and automatically switch to keep warm
mode. The Soup cooking indicator goes out
and the Warm/Cancel indicator lights up
yellow.
• After the cooking is nished, you can press
the Warm/Cancel button to turn off the keep
warm function and unplug the appliance
immediately after use.
Note: The Warm/Cancel button can be
pressed at any time during cooking to cancel
the operation.
• Before opening the lid, make sure to release
the pressure from the inside of the appliance
(refer to “Releasing pressure after cooking”
section).
Chicken
• Follow the steps in “preparations before
cooking”.
• Turn the pressure regulator to “CLOSE” position.
• Insert the connector of power cord to the
socket of the pressure cooker and put the plug
into to the wall power outlet. Switch Power
outlet on, the appliance is now in Standby
Mode.
• Press CHICKEN button, the Chicken cooking
indicator will illuminated. The default pressure
keeping time “0030” appears on LED Display
and start to ash, “30” indicators the pressure
keeping time is 30 minutes.
• Within 8 seconds after pressing the Chicken
button,
- You can press + or - buttons to set a different
pressure keeping time if you prefer an
alternative cooking time (The adjustment time
range is 15-35 minutes).
- You can also press Timer and + or – buttons to
set the delayed cooking time. (refer to “Setting
the timer” section)
Note: If no button is pressed within 8 seconds,
the appliance activates the selected mode
automatically.
• The cooking process will start automatically
after 8 seconds ashing time or preset timer has
elapsed.
• During cooking, the appliance will beep 1 time
when the working pressure is reached and the
pressure keeping time will start counting down.
• When the pressure keeping time has elapsed,
the electric pressure cooker will beep 5 times
and automatically switch to keep warm mode.
The Chicken cooking indicator goes out and
the Warm/Cancel indicator lights up yellow.
• After the cooking is nished, you can press
the Warm/Cancel button to turn off the keep
warm function and unplug the appliance
immediately after use.
Note: The Warm/Cancel button can be pressed
at any time during cooking to cancel the
operation.
• Before opening the lid, make sure to release the
pressure from the inside of the appliance (refer
to “Releasing pressure after cooking” section).