3
Connect the appliance to a suitable wall outlet
(AC 240V~50Hz)
This appliance is intended to be plugged in a
standard domestic power outlet only.
Before connecting, check that the power supply
voltage and current rating corresponds with the
power supply details shown on the appliance
rating label.
Make sure the heating element, the temperature
sensor, and the outside of the inner pot are clean
and dry before you put the plug in the power
outlet.
Lay out the cord in such a way to avoid
unintentional pulling or tripping hazards. If an
extension cord is used, its capacity needs to be
suitable for the power consumed by the
appliance.
Only use an “Earthed” outlet
This appliance is classied as protection class I
and must be connected to an earthed outlet.
Always make sure that the plug is inserted rmly
into the power outlet.
To avoid damaging the cord, do not squeeze,
bend or chafe it on sharp edges. Also take care to
keep it away from hot surfaces and open ames.
Never use any accessories or parts which are not
recommended by the manufacturer
The use of attachments or accessories not
recommended or sold by the manufacturer
can cause re, electric shock or injury.
Only use the supplied utensils or a plastic or
wooden scoop to remove food from the
appliance. Only use the removable inner pot
supplied.
Never add any additional weight on the pressure
regulator valve or replace the pressure regulator
valve with another object.
Do not use a damaged power cord
If the supply cord is damaged, it must be
replaced by a qualied electrician.
Do not insert foreign objects
Do not insert any foreign objects into the inside of
the casing.
Do not open the appliance casing under any
circumstances.
To Next Page
Loading...