Belmont Clesta User Manual

0197
IMPORTANT
This manual provides operating instructions for the CLESTA.
The instructions contained in this booklet should be thoroughly read and
understood before operating the unit. After the installation has been
completed, keep this manual in a safe place and refer to it for future
maintenance.
If you have any questions about this Manual or this product, please contact us.
If manual becomes unreadable or is lost, please request a new manual
by contacting your dealer.
Installation should be conducted by authorized personnel only.
Follow instructions on installation manual.
DENTAL UNIT
INSTALLATION
and
OPERATING INSTRUCTIONS

Belmont Clesta Specifications

General

Type	Dental Chair
Cuspidor	Optional
Manufacturer	Belmont
Model	Clesta
Spittoon	Optional
Headrest	Adjustable
Backrest	Narrow
Weight	Varies by configuration
Dimensions	Varies by configuration
Power Requirements	120 VAC or 230 VAC

Summary

Intended Use of the Product

Symbols

Safety Precautions

General Introductions

Unit Mount Type Overview

Diagram and labels for the unit mount type dental unit, showing key components.

Split Cart Holder Type Overview

Diagram and labels for the split cart holder type dental unit, showing key components.

Dimensions

Specifications

Installation Instructions

Junction Box Location and Plumbing Layout

Details on the recommended location and plumbing layout for the junction box, including diagrams.

Junction Box Plumbing Height

Diagram illustrating plumbing connections and heights for the junction box.

Attach Unit to Chair

Instructions for attaching the cuspidor unit to the dental chair using mounting brackets.

Install Dental Light

Steps for installing the dental light assembly onto the light pole and connecting its wiring.

Connect Umbilical Hose to Junction Box

Procedure for connecting the umbilical hose from the cuspidor unit to the junction box.

Connect Utility Section

Procedures for connecting utility lines including air, water, drain, vacuum, and power sources.