To Next PageTo Next Page
Need help?Do you have a question about the BELTTT BLP Series and is the answer not in the manual?
Covers essential safety guidelines, warnings, and precautions for safe operation and to prevent damage.
Introduces the BLP series remotely controlled intelligent inverter, highlighting its features and benefits for complex power demands.
Details BLP series inverters as core components for solar off-grid power generation systems, with system diagrams.
Describes BLP series inverters for home, office, car, boat, and outdoor emergency power supply uses.
Lists suitable electrical appliances and illustrates the pure sine wave working principle with a voltage waveform diagram.
Provides detailed physical dimensions for the BLP-1000S, BLP-2000S, and BLP-3000S series inverters.
Illustrates inverter components, ports, and shows available AC socket configurations (UK, EU, FR).
Covers installation flow chart, unpacking inspection, manual check, and operating environment guidelines.
Illustrates how to connect the inverter to batteries (12V/24V) and the remote control panel for operation.
Details steps for connecting battery, remote panel, and load, including removal instructions.
Covers wire selection, fusing, vehicle/ship installation tips, and remote control installation.
Provides installation dimension drawings for BLP-1000S, BLP-2000S, and BLP-3000S series inverters.
Comprehensive table detailing model specifications, power, voltage, current, efficiency, battery type, and fuses.
Explains the three-digit LED display indicators (VBAT, VINV, POWER, ICHG, ERR) on the inverter's host unit.
Lists inverter error codes, fault descriptions, and recommended methods for troubleshooting and removal.
Details the display functions of the wired remote control panel, including input/output voltage and load status.
Explains button functions, prompt tones, inverter on/off, LED display meanings, and how to view current status.
Detailed steps for configuring frequency, battery protection, buzzer, AC output voltage, and operating modes via the control panel.
Visual guides illustrating the navigation and selection process for various inverter settings on the control panel.
States the total harmonic distortion of the inverter's output waveform is less than 5%.
Specifies the required temperature and humidity ranges for operating and storing the inverter.
Mentions packaging drop test compliance with IATA standards and corrosion resistance of metal parts.
Lists recommended AWG wire sizes and lengths for DC input connections for different models.
Features intelligent fan speed control, touch button interface, and remote control panel for enhanced user experience.
Allows dual frequency selection, AC voltage settings, and supports various battery types with protection features.
Includes voltage display, USB output, plug-and-play design, and durable, oxidation-resistant metal casing.
General