EasyManua.ls Logo

Belvedere 3100 CAMEO User Manual

Belvedere 3100 CAMEO
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Shampoo
Bowls
3100 CAMEO BOWL
3800 ALPHA BOWL
Belvedere USA Corporation
A wholly owned subsidiary of The Wella Corporation
One Belvedere Boulevard, Belvidere, Illinois 61008
Printed in U.S.A. E.C.O. 9162 4001146 Rev. 04-05
PORCELAIN ENAMEL SHAMPOO
BOWL WITH MODEL 522 FIXTURE
AND 603 BACKFLOW PREVENTER
INSTALLATION AND PLUMBING
NOTE: Read the instructions through before starting
to familiarize yourself with the components.
Any conformance with LOCAL CODES or
INSPECTIONS is the RESPONSIBILITY
OF THE PURCHASER.
1. Attach the fixture to the bowl according to
the instructions packed with the fixture.
3. Place the gasket
over the flange
on the bottom
of the hose
receiver.
PAGE 1 of 4
3100
3800
DRIVE
SCREW
IN 2 OR 3
TURNS
MOUNTING
SCREW
HOSE
RECEIVER
GASKET
4. Place the hose receiver and gasketin the bowl.
Install the Mounting Bracket on the bottom
side of the Bowl with four (4) embossed
corners facing upward, against the
bottom of the Bowl. Secure with four (4)
Screws.
DO NOT OVERTIGHTEN.
MOUNTING
SCREW
EMBOSSED
CORNER
(UP)
ATTACH HOSE RECEIVER TO BOWL
(STEPS 2 thru 4).
2. To make hose receiver installation easier,
complete these steps to cut screw threads
in the mounting holes:
S Take a mounting screw and drive it 2 or
3 turns into one hole.
DO NOT OVERTIGHTEN.
S Remove the screw.
S Repeat for all four (4) mounting holes.
Question and Answer IconNeed help?

Do you have a question about the Belvedere 3100 CAMEO and is the answer not in the manual?

Belvedere 3100 CAMEO Specifications

General IconGeneral
Bowl ShapeElongated
MaterialVitreous China
ColorWhite
TypeToilet
Flush TypeGravity
Rough-In Size12 inches
Trap Size2 inches

Summary

Shampoo Bowl Fixture and Hose Receiver Installation

Attach Hose Receiver to Bowl

Instructions for attaching the hose receiver to the shampoo bowl, including preparing mounting holes.

Drain Assembly Installation

Install the Drain Assembly

Steps for installing the drain assembly, including using plumber's putty and securing the strainer body.

Bowl Mounting and Cleaning

Mount Bowls to the Wall

Detailed steps for mounting the 3100 and 3800 bowls to the wall, including bracket height and leveling.

Cleaning Instructions

Guidelines for cleaning the shampoo bowl, recommending non-abrasive cleaners and regular waxing.

Rough-In Plumbing Specifications

Shampoo Bowl Neckrest Height

Specifications for bowl neckrest height and bracket placement for optimum comfort.