Belwith FIRST WATCH 1381 User Manual

©
Belwith Products
3100 Broadway, SW • Grandville, MI 49418
Made to Belwith Products’ specications in China
INSTRUCTIONS
Cabinet and
Drawer Lock
1381
1. Mount template to door or drawer.
2. Remove cam from lock. Drill 3/4" diameter hole.
3. Place collar onto lock and insert lock into hole.
4. Place spur washer (for wood only) to lock.
5. Place 3/4" nut tightly.
6. Place 90 or 180 rotation washer, whichever is preferred.
7. Place cam (either straight or bent, whichever suits conditions
better). You can adjust cam by bending it slightly.
8. Fasten lock with lock washer and screw.
SATISFACTION GUARANTEED
(See website for details http://www.Hickoryhardware.com/warranty)

Belwith FIRST WATCH 1381 Specifications

General

Brand	Belwith
Model	FIRST WATCH 1381
Category	Locks
Style	Traditional
Door Thickness	1-3/8" to 1-3/4"
Handing	Reversible
Strike Plate Included	Yes
Mounting Hardware Included	Yes
Finish	Brass
Backset	Adjustable 2-3/8" or 2-3/4"

Summary

Installation Instructions

Prepare and Insert Lock

Mount template, drill hole, and insert lock with collar into the opening.

Secure Lock Assembly

Attach spur washer for wood, tighten nut, and add rotation washer.

Attach Cam and Finalize

Place and adjust cam, then fasten lock with washer and screw.