5 4 4
PLEASE OBSERVE THE FOLLOWING PRECAUTIONS
AND INSTRUCTIONS BEFORE INSTALLATION AND USE.
• Use care to avoid cross threading or over tightening the connections.
Unless otherwise indicated, use an adjustable wrench to tighten
one-quarter turn past hand-tight.
• Immediately check for any leaks.
• Continue to check for leaking throughout the
first hour of installation.
• If leaking occurs, turn off water supply and
discontinue use immediately.
• Risk of Scalding. High water temperature can cause severe burns. Do not
operate this faucet with a water supply that has a maximum temperature
above 160°F. Only connect the faucet to a water supply of drinking quality
at a pressure of 20 psi (139 kPa)- 80psi (551kPa). Observe all local
plumbing, electrical, and building codes.
IMPORTANT SAFEGUARDS
To Next Page
Loading...
