STEP 2
Secure Vanity to Wall
ASSEMBLY INSTRUCTIONS
1. With two adults, carefully lift vanity onto the wall cleats, mating
with Cleat B and resting flush against the wall
2. Check installation with level
3. Install plumbing (we recommend the use of a licensed plumber)
4. Apply silicone to the sides and back edge of the top
5. Wipe away any excess silicone immediately
6. Allow silicone sealant to fully dry for 24 hours
carefully lift vanity onto wall cleats,
mating with Cleat B (Part B)
To Next Page
Loading...