200781_1
OPERATION BY MANUAL BUTTON
MAIN POWER (ON / OFF) SWITCH:
The main switch is on the bottom front of the appliance, and it supplies power to all of the functions of
the fireplace. This switch must be in the “ON” position for any of the functions (including the remote) to
work.
FLAME SETTING BUTTON:
By pressing the FLAME button, the unit will cycle through four flame effect (high, middle, low, off)
HEATER RUNNING INDICTOR:
If the appliance heater is running and the flame and mood light are turned off, the heater running
indicator light is always on. If the appliance heater is running and the flame or mood light is turned on,
the heater running indicator will be extinguished after 10 seconds.
RESET BUTTON FOR THE REMOTE CONTROL:
If the appliance operates incorrectly or the appliance cannot be controlled by the remote, the RESET
button is used to reset the communication between the remote and the appliance. Check section
OPERATION BY REMOTE CONTROL-R30 for more details.
9
To Next Page
Loading...
Need help?
General