Need help?Do you have a question about the BEN Marine ANTHEA and is the answer not in the manual?
Details of the standard ANTHEA equipment components and features.
Details of the ANTHEA Blind version equipment components and features.
Overview of the ANTHEA's key features, including display and capabilities.
Specifications for power supply, outputs, and damping adjustment.
Information on different sensor types and their corresponding hull fittings.
Guidance on selecting the appropriate hull fitting based on vessel type and regulations.
Recommended placement for the sensor on the vessel's hull.
Step-by-step guide for installing screwed-to-hull fittings with valves.
Step-by-step guide for installing welded-to-hull fittings with valves.
Installation procedures for screwed-to-hull fittings without valves.
Installation procedures for welded-to-hull fittings without valves.
Installation and dismounting procedures for lens probe with stainless steel hull fitting.
Guidelines for mounting the ANTHEA electronic unit, including flush and bracket options.
Instructions for installing the GA120 analog speed and distance repeater.
Wiring diagrams and instructions for connecting the ANTHEA system components.
Installation procedures for the RGD100 combined speed and distance repeater.
Diagram illustrating system cabling and installation configurations.
Detailed drawings for various hull fitting types and their installation.
Drawings for lens sensor and hull fittings made of stainless steel and aluminum.
Details product description, options, software versions, documents, and test reports.
Specifies application requirements and limitations for the product.
Requirements for product marking, including maker's name and safety distance.
General| Brand | BEN Marine |
|---|---|
| Model | ANTHEA |
| Category | Marine Equipment |
| Language | English |
To Next Page