SpA BL 300 /350
6
• In the type with full side and vertical adjustment (PICT 18) you have to release the blocking lever “P” than adjust the handlebar
position as you prefer and lock it again.
• The standard tiller is 57 cm wide, with two sets of knives on each side, and the side protection plates.
• Adding other two sets of blades you can extend the tiller to 80 cm (PICT 6). The blades of the tiller-knives should always be directed
ahead, towards the front of the machine.
• We recommend to use the tiller with the side plates because they improve the stability of the machine and they protect from plants
and any other obstacle.
• As optional accessory the machine can fit an adjustable ridger delivered complete with its own support which should be fitted on the
rear side of the machine, replacing the standard spur.
ATTENTION! PLEASE DO NOT KEEP THE ENGINE RUNNING WHEN THE MASCHINE IS NOT
WORKING
.
- PICT n°12- -PICT n°13- -PICT. n°14-
-PICT n°15- PICT n°16-
-PICT17- -PICT 18- -TILLER-
To Next Page
Loading...
