SpA F 170
7
MAINTENANCE
• For changing the oil and other maintenance operations on the motor (spark plugs, air f ilter, regulations), ref er to the
motor manual provided.
• NB: To unscrew the oil drain plug of the motor, disassemble the rear cover (Fig. 8 Ref . D).
• Empty the gearbox of oil by unscrewing the oil drain plug, let the oil drain completely . Af ter screwing back the cap
tightly, f ill to the correct level with new oil recommended by the manufacturer.
• Do not leave the exhausted oil in the env ironment.
• Check periodically the oil lev el and fill in with new oil if necessary .
• If the grass is not cut in a satisf actory manner despite the adjustments, the blade must be sharpened or replaced.
Follow the instructions on the E.S.M. maintenance sheet.
• For any mechanical repair, especially during the warranty period, we recommend to go to a specialized repair shop of
the dealer.
• For transporting conv enience, the handles can be disassembled by means of the two knobs (Fig. 1 Ref. 10). The
same is recommended for the cutting bar, which is easily disassembled by removing the special split pin on the bar
support (Fig. 9 Ref. E). Always use glov es and apply the protectiv e strip to the blade.
• Regularly check that screws are tight. Pay special attention to the screws fastening the bar to its support.
• Lubricate periodically the crown wheel for the wheel transmission (Fig. 9 Ref. “F”).
CAUTION:!!
It is advised not to keep the motor running when the machine is not
being used for its specific purpose
WARRANTY
The machines and accessories are guaranteed f or 12 months, with the exception of electrical parts or parts in rubber.
The manuf acturer shall replace pieces recognized as def ectiv e free of charge. Labour and transport shall be at the
expense of the purchaser. Warranty requests must be made through dealers authorized by the manufacturer.
With regard to materials not of our manuf acture, with special ref erence to the motor, the rules laid down by the
respective manuf acturers shall apply . Any requests f or repair shall theref ore be directed to the specif ic service centres
in the respective areas.
For any problem or repair, contact the dealer where the machine was purchased.
SAFETY TESTS AND CERTIFICATION
Declaration of CE conf ormity in accordance with the directiv e 98/37/CE and the directiv e EMC 89/338/CE modif ied
92/31/CE.
40010 San Matteo della Decima BO Italy Via Lampedusa 1 Tel. (051) 820511
We hereby declare that the machine conf orms with the essential requirements f or health and safety in accordance with
directive 98/37/CE and the directiv e EMC 89/338/CE modif ied 92/31/CE.
POWER MOWER TYPE MODEL F 170 B / F170 H / F 170 T
For verif ication of the conf ormity with the abov e-mentioned Directiv es reference has been made to the f ollowing: EN292-
1, EN292-2 EN 709
CHAIRMAN OF THE BOARD
S.Matteo della Decima li
05/06/2002
RESULT AND TESTS
POWER MOWER TYPE MODEL F 170 B / F 170 H / F 170 T
Acoustic pressure to the operator: LAeq = dB (A) 86 -
Proof conditions : height 1,6 m f rom handlebar middle - Vibration to handles with weighting ISO 1033 v alue m/sec
2
1,72
To Next Page
Loading...