5124-024
5124-039
163CC 3-IN-1 LAWN MOWER
20
• For best results, adjust the lawn mower cutting height so that the lawn mower cuts
o only the top one-third of the grass blades (Figure A). If the lawn is overgrown it will
be necessary to raise the height of cut to reduce pushing eort and to keep from over-
loading the engine and leaving clumps of mulched grass. For extremely heavy mulch-
ing, reduce your width of cut by overlapping previously cut path and mow slowly.
• Certain types of grass and grass conditions may require that an area be mulched a
second time to completely hide the clippings. When doing a second cut, mow across
(perpendicular) to the first cut path.
• Change your cutting pattern from week to week. Mow north to south one week, then
east to west the next week. This will help prevent matting and graining of the lawn.
To Next Page
Loading...
