8
5049-744
WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER
• Disconnect the spark plug wire from the spark plug and place the wire where it
cannot contact spark plug.
WHEN TESTING FOR ENGINE SPARK
• Use approved spark plug tester.
• DO NOT check for spark with spark plug removed.
WARNING Starter and other rotating parts could entangle hands, hair, clothing,
or accessories resulting in serious injury.
• NEVER operate pressure washer without protective housing or covers.
• DO NOT wear loose clothing, jewelry or anything that could be caught in the starter
or other rotating parts.
• Tie up long hair and remove jewelry.
WARNING Risk of eye or bodily injury. Spray could splash back or
propel objects resulting in serious injury.
• Always wear indirect vented (chemical splash) safety goggles marked
to comply with ANSI Z87.1 when using or in vicinity of this equipment.
• NEVER substitute safety glasses or dry condition goggles for indirect vented safety
goggles.
• Always wear protective clothing such as a long sleeved shirt, long pants and
close-toed shoes.
• NEVER operate pressure washer when barefoot or wearing sandals or shorts.
CAUTION Excessively high operating speeds could result in minor injury.
Excessively low speeds impose a heavy load.
• DO NOT tamper with governor spring, links or other parts to increase engine
speed. Pressure washer supplies correct rated pressure and flow when running at
governed speed.
• DO NOT modify pressure washer in any way.
NOTICE High pressure spray could damage fragile items including glass.
• DO NOT point spray gun at glass when using red (0 °) spray tip.
• NEVER aim spray gun at plants.
NOTICE Improper treatment of pressure washer could damage it and shorten its life.
• If you have questions about intended use, ask dealer or contact qualified service center.
• NEVER operate units with broken or missing parts, or without protective housing or covers.
•
DO NOT bypass any safety device on this machine.
To Next Page
Loading...
