5044-026
20V MAX BRUSHLESS 2 SPEED POWER WASHER
8
• Hold the power cleaner securely with both hands. Expect the trigger handle to
move when the trigger is pulled due to reaction forces. Failure to do so could
cause loss of control and injury to yourself and others.
• Never attempt to make any adjustments while the motor is running
• Protective covers must always cover rotating parts when the motor is running.
• Check bolts and nuts for looseness before each use. A loose bolt or nut may
cause serious motor problems.
• When servicing use only recommended or equivalent replacement parts.
Use of any other parts may create a hazard or cause product damage.
• ONLY use cold or warm water. Never use water more than 43°C / 110°F.
• Never spray close to the surface to be cleaned as you can damage the surface.
expose the product to rain. Store indoors in a dry area. Corrosive liquids, water,
and chemicals can enter the product’s electronic components and/or battery
compartment and damage electronic components and/or the battery pack,
injury. Remove any buildup of dirt and debris by wiping the product clean with
a dry cloth occasionally.
• For outdoor use only.
SERVICE
replacement parts. This will ensure that the safety of the power tool is maintained.
5044-026f EnProdMaunal P_.indd 8 2020-12-17 2:00 PM
To Next Page
Loading...
Need help?
General
