EasyManuals Logo

Benchmark BCT24M User Manual

Benchmark BCT24M
99 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
51
REPLACING THE BELT
The belt replacement must be carried out at a licensed service center.
Replace the belts as soon as they show obvious signs of wear! ALWAYS USE
GENUINE REPLACEMENT BELTS!
TROUBLESHOOTING
Injury hazard if engine is started inadvertently. Protect yourself against
injury.
Before carrying out any work on this mower:
1. Switch off the engine.
2. Remove the ignition key.
3. Actuate the parking brake.
4. Wait until all moving parts have come to a standstill and the engine has fully
cooled.
5. Pull the spark plug connector off the engine so that the engine cannot
inadvertently start.
Faults which occur while you are using your mower often have simple causes which
you should know and may be able to rectify yourself. If you are in any doubt,
however, your dealer or authorized service center will be happy to provide
assistance.
Malfunction
Cause
Remedy
Engine does not start
Lack of fuel.
Fuel tank; check tank
bleeding; check fuel filter
Poor quality, contaminated
or old fuel in the tank.
Always use fresh fuel from
clean containers; clean
carburetor (customer
service by a specialized
after-sales center).
Air filter contaminated.
Clean air filter

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Benchmark BCT24M and is the answer not in the manual?

Benchmark BCT24M Specifications

General IconGeneral
BrandBenchmark
ModelBCT24M
CategoryLawn Mower
LanguageEnglish

Related product manuals