EasyManua.ls Logo

Benchmark BCT24M - 3. Controls

Benchmark BCT24M
99 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
85
3.2 FUEL
Fuel Recommendations
Use clean, fresh, regular unleaded gasoline with a minimum of 85 octane.
These engines are certified to operate on unleaded gasoline. Unleaded gasoline
produces fewer engine and spark plug deposits and extends exhaust system life.
Never use stale or contaminated gasoline or an oil/gasoline mixture. Avoid
getting dirt or water in the fuel tank.
Occasionally you may hear a light ‘‘spark knock’’ or ‘‘pinging’’ (metallic rapping
noise) while operating under heavy loads. This is no cause for concern.
If a spark knocks or pinging occurs at a steady engine speed, under normal load,
change brands of gasoline. If spark knock or pinging persists, see an authorized
servicing dealer.
FUEL TANK CAPACITY: 1.4L (0.370 US Gal, 0.31 Imp Gal)
Do not use pressurized starting uids.
Vapors are ammable.
Gasoline and its vapors are extremely flammable and explosive.
3.3 STARTING ENGINE
3.3.1 Control Lever
FOR STARTING A COLD ENGINE: Move the Control Lever to the choke position.
FOR RESTARTING A WARM ENGINE: Do not use the choke when the engine is warm.
Move the control Level slightly past the idle position.

Related product manuals