Benchmark H5000-H User Manual

H5000 Series MultiTherm Shakers
5
Chapter 1: Introduction
The MultiTherm shaker is an ideal instrument for intensive mixing of samples under
temperature regulated conditions.
Mixing and temperature control modes can be used both simultaneously and
independently i.e, the device can work as shaker and/or as an incubator. The base
instrument can be used with a variety of different blocks. The instrument is applicable
for DNA analysis, extraction of lipids and other cell components, DNA library creation,
PCR amplification, pre-denaturation in electrophoresis, serum solidification etc.
Features of this product as follows:
1. Because it can be used with various optional mixing blocks, the instrument can
adapt to different tubes and plates to accommodate many experimental needs.
Customized blocks are available to suit your specific demands.
2. LCD display
3. Simultaneous display of set and actual time, temperature and speed
4. Over-heat protection system ensures safety & reliability
5. Temperature can be calibrated to meet the user's needs
6. End-of-run signal alerts the user of cycle completion
Chapter 2: Specifications
1. Normal operating conditions
Ambient temperature: 5C ～30C / Relative humidity: ≤70%
Note: Do not attempt to operate the instrument at temperatures or humidity levels
outside of this range.

Benchmark H5000-H Specifications

General

Brand	Benchmark
Model	H5000-H
Category	Paint Sprayer
Language	English