What to do if Benchmark H5000-H has no display when powered up?
If your Benchmark Paint Sprayer's display doesn't turn on, there could be several reasons: * **No power:** Check the power supply. * **Fuse failure:** Replace the fuse with a ?250V 3.0A 5X20mm? fuse. * **Broken switch:** The switch may need to be replaced. * **Other issues:** If none of the above steps work, it is best to call for service.
Why is there no heating or cooling in my Benchmark H5000-H Paint Sprayer?
If your Benchmark Paint Sprayer isn't heating or cooling, it might be due to a broken sensor or a broken TE module. In this case, it is best to call for service.
What to do if actual and displayed temperatures are significantly different on Benchmark H5000-H?
If the actual and displayed temperatures on your Benchmark Paint Sprayer are significantly different, it could be due to temperature sensor failure. In this case, it is best to call for service.
What to do if Benchmark H5000-H has no reaction when a key is pressed?
If your Benchmark Paint Sprayer doesn't respond when you press a key, the film switch may have failed. In this case, it is best to call for service.
General| Brand | Benchmark |
|---|---|
| Model | H5000-H |
| Category | Paint Sprayer |
| Language | English |
Read manual carefully before operating the instrument.
Follow guidelines for operation, maintenance, and repair for safety.
Procedures for cleaning the block wells and instrument exterior.
Specifies ambient temperature and relative humidity limits for safe operation.
Lists detailed technical parameters for the H5000-H model.
Lists detailed technical parameters for the H5000-HC model.
Provides a visual overview of the instrument's physical components.
Explains the layout and function of the control panel and display.
Details the operational purpose of each key on the instrument.
Guides users on setting individual operational parameters like temperature and speed.
Instructions for programming sequential program execution on H5000-HC.
How to deactivate temperature, speed, or timer control functions.
Describes the operation of the pulse mixing mode.
Procedure for self-calibrating the instrument's temperature accuracy.
Step-by-step guide for replacing the interchangeable block.
A table outlining common issues, their possible causes, and recommended actions.
To Next Page