î
- 2 -
Safety Warnings and Guidelines
1. Important operation information:
Please read this manual carefully prior to any attempt to operate the Instrument.
2. Security:
The operation, maintenance and repair of the Instrument must comply with the
basic guidelines and warnings stated below. Failure to comply may jeopardize the
instrument life, warranty coverage and user safety.
Read the manual prior to power up of the instrument. Read the
guidelines and directions below and be familiar with all safety
warnin
s and
uidelines.
Use this product indoors. Do not operate in a damp or wet
environment.
Do not attempt to disassemble or repair the Instrument by
yourself. Disassembly will void the warranty. If there is a
malfunction contact your supplier for repair service.
The three pin plug supplied with the instrument is a safety
device that should be matched with a suitable grounded outlet.
Do not attempt to defeat the three pin plug or its grounded
function.
During normal operation, the temperature of metal block will
become very hot. Do not touch the block during or within 30
minutes of operation.
Close all test tube lids before inserting into the block. Do not
allow liquids to spill into the block or any part of the instrument.
To Next Page
Loading...
Need help?
General