Benchmark H5000-H User Manual

H5000 Series MultiTherm Shakers
─ 10 ─
3. Key Functions
Prog. 
Temp. 
Speed 
Time
Seq. Link
Pulse
Start/Stop
Program Selection Keys: Use the up and down keys to
choose the desired program (P1, P2, P3, P4 or P5).
Temperature Selection Keys: Press“” or “” to select the
desired temperature in increments of 1°C. (To quickly scroll to
the desired temperature, press and hold the“” or “” keys.)
Time Selection Keys: Press “” or “” to select the desired
run time. (To quickly scroll to the desired time, press and hold
the“” or “” keys.)
Sequence Link Key. Press the “Seq. Link” key to run
consecutive programs. Choose from P1 to P2, P1 to P3, P1 to
P4, or P1 to P5 to run up to five consecutive programs.
(The Sequence link function is only available on the H5000-HC.)
The device mixes at the speed shown on the display for as long
as the Pulse key is held down. The time is counted in seconds
until 999 Seconds has expired.
Speed Selection Keys: Press “” or “” to select the desired
mixing speed in increments of 10rpm. (To quickly scroll to the
desired mixing speed, press and hold the“” or “” keys.)
Start/Stop Key. press this key to start or stop the program. Press
briefl
y
to start. Press and hold to sto
p
.

Benchmark H5000-H Specifications

General

Brand	Benchmark
Model	H5000-H
Category	Paint Sprayer
Language	English