BeneCheck BK3-12M-D User Manual

Multi-Monitoring Meter
T
o
t
a
l
C
h
o
l
e
s
t
e
r
o
l
B
l
o
o
d
G
l
u
c
o
s
e
U
r
i
c
A
c
i
d
Check Your Health
Hand in Hand,
lt
h
Ha
nd
in Hand,
User’s Manual
Total Cholesterol Glucose Uric Acid
General Life Biotechnology Co., Ltd.
5F, No.240, Shinshu Rd., Shin Juang Dist.,
New Taipei City, 242 Taiwan
www.BeneCheck.com.tw
MDSS GmbH
Schiffgraben 41
30175 Hannover, Germany
TEL : +886-2-22053698
FAX : +886-2-22080779
E-mail : service@glbiotech.com.tw
Doc.#:FIG-312M-C2-101-2 Jan, 2017
BK3-12M-D
Model:BK3-12M-D

BeneCheck BK3-12M-D Specifications

General

Sample Type	Capillary whole blood
Operating Temperature	10°C to 40°C
Power Source	2 x AAA batteries
Power Supply	2 x AAA batteries
Intended Use	For self-testing of glucose, cholesterol, and triglycerides levels in capillary whole blood.
Operating Humidity	≤85% RH
Glucose Range	20-600 mg/dL
Cholesterol Range	100 to 400 mg/dL
Measurement Range	Glucose: 20-600 mg/dL, Cholesterol: 100-400 mg/dL, Triglycerides: 70-600 mg/dL
Resolution	1 mg/dL
Battery Life	Approximately 1000 tests
Dimensions	88 x 64 x 22 mm

Summary

Chapter 1 BeneCheck Meter Introduction

1.1 Introduction

Overview of the BeneCheck Multi-Monitoring Meter and its technology.

1.2 Contents of the Kit

Lists all items included in the BeneCheck Meter Kit.

1.3 Labelling and Information

Explains various symbols and labels used on the meter and packaging.

1.4 BeneCheck Meter Kit

Diagram showing the BeneCheck meter's front and back sides with labeled components.

Meter Interface and Components

LCD Screen Display and Alert Tones

Details the meter's LCD screen layout, icons, and audible alert tones.

Test Strips and Code Strips

Explains the types of test strips and the function of code strips.

Chapter 2 Setting the Meter

2.1 Installing/Replacing Batteries

Instructions for inserting or changing the CR2032 battery in the meter.

2.2 Setting Date and Time

Steps to adjust the meter's date and time settings.

2.3 Code the Meter

Procedure for coding the meter using a code strip for test strips.

Chapter 3 Performing a Test

3.1 Before Testing

Lists materials needed and preparation steps before performing a test.

3.2 Performing the Test

Detailed steps on how to perform a blood glucose, cholesterol, or uric acid test.

3.3 Alternate Site Testing (AST)

Guidance on testing glucose from sites other than the fingertip.

3.4 Care After Testing

Instructions on proper disposal of used lancets and storing the meter.

Chapter 4 Meter Memory Function

Checking Memories

How to access and navigate stored test results and averages on the meter.

Chapter 5 Control Solution Test

Performing a Control Test

Steps and guidelines for using control solution to check meter performance.

Chapter 6 Transmission Function

Bluetooth Connectivity

How to use the meter's Bluetooth function to transmit test results.

Chapter 7 Care and Maintenance

7.1 Storing Your Meter

Guidelines for proper storage to protect the meter from damage and interference.

7.2 Cleaning and Caring

Instructions on how to clean the meter surface safely and effectively.

Chapter 8 Error Message and Trouble Shooting

Common Error Messages and Solutions

Lists error codes, their causes, and recommended troubleshooting steps.

Chapter 9 Specification

Technical Specifications

Detailed technical specifications of the BeneCheck meter, including ranges and dimensions.