Ⅰ. Mechanism
Ⅰ-1. Derailleur
1.Installation of the sprocket to the hub
Place right hand dust cap C onto the driver on the right side of the hub body. Next, install the sprocket and secure it in place
with the snap ring.
2.Installation of the cassette joint to the hub
Install the driver cap to the driver to the right side of the hub body. Next, turn the cassette joint pulley in the direction of
the arrow so that the yellow mark “ ” is aligned with the yellow mark“ ”, and then align the yellow marks“ ”on
the
cassette joint with the yellow marks “ ”on the right side of the hub body.
To Next Page
Loading...
