Benelli M2 Field - Assembly; Lists package components: stock-receiver-bolt-fore-end unit and barrel-breech unit.; Assembly steps: insert bolt handle, unscrew fore-end cap, remove from magazine tube.

18
Montaggio
(da fucile imballato)
Componenti confezione (fig. 1):
a) gruppo calcio-carcassa-otturatore-astina
b) gruppo canna-culatta
Procedura di montaggio
1) Inserire a fondo la manetta di armamen-
to nel corpo otturatore (fig. 2).
2) Svitare il cappellotto fissaggio astina e
toglierlo dal tubo serbatoio (figg. 3-4).
Assembly
(from packaged gun)
Components of the package (fig. 1):
a) stock-receiver-bolt-fore-end unit
b) barrel-breech unit
Assembly procedure
1) Insert completely the bolt handle into
the breech bolt unit (fig. 2).
2) Unscrew the fore-end cap and remove
from the magazine tube (figs. 3-4).
Montage
(fusil emballé)
Pièces de l’emballage (fig. 1):
a) groupe crosse-carcasse-obturateur-devant
b) groupe canon-culasse
Marche à suivre pour le montage
1) Introduire la manette d’armement à fond
dans le corps de l’obturateur (fig. 2).
2) Dévisser le capuchon de fixation du de-
vant et l’enlever du magasin (figs. 3-4).
1 2
b
a