EasyManua.ls Logo

Benelli Raffaello User Manual

Benelli Raffaello
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
RAFFAELLO
• CRIO
• ELEGANT
• Limited Edition
Question and Answer IconNeed help?

Do you have a question about the Benelli Raffaello and is the answer not in the manual?

Benelli Raffaello Specifications

General IconGeneral
TypeShotgun
ActionSemi-Automatic
Gauge12
Chamber3"
Magazine Capacity4+1
ChokeInterchangeable
FinishBlued
Barrel Length28"

Summary

Safety Rules

Introduction

Operation

Warranty

Assembly

Assembly Procedure

Step-by-step instructions for assembling the shotgun from its packaging.

Unloading the Shotgun

Unloading Procedure

Step-by-step instructions for safely unloading the shotgun.

Safety Catch

Loading the Shotgun

Loading Procedure

Step-by-step instructions for loading the shotgun.

Cartridge Replacement

Manual Cartridge Introduction

Procedure for replacing a chambered cartridge manually.

Using the Cartridge Drop Lever

Procedure for replacing a chambered cartridge using the drop lever.

Troubleshooting

Shotgun Fails to Fire

Steps to take when the shotgun does not fire.

Fore-end Cap Installation

Ammunition

Ammunition to Use

Maintenance

Barrel Cleaning

Instructions for normal cleaning of the barrel after use.

Firing Mechanism Cleaning

Periodic cleaning and lubrication of firing mechanism parts.

Bolt Assembly Maintenance

Dismantle, clean, and lubricate the bolt assembly.

Part Preservation

Shotgun Disassembly

Disassembly Procedure

Step-by-step instructions for disassembling the shotgun.

Shotgun Assembly

Assembly Procedure Part 1

Grip stock-receiver, press carrier button, insert trigger group.

Assembly Procedure Part 2

Insert trigger guard pin bush into receiver.

Locking Head Pin Installation

Firing Pin and Spring Installation

Firing Pin Retaining Pin Installation

Bolt Assembly Installation

Opening the Bolt

Cover and Carcass Alignment

Cover Locking

Bolt Handle Installation

Final Assembly Steps

Accessories and Adjustments

Drop Adjustment

Instructions for adjusting the stock's drop using shims.

Stock Drop Adjustment

Drop Adjustment Kit Components

Replacing Stock Components

Butt Plate Screw Removal

Unscrew the two fixing screws of the butt plate.

Stock Retaining Nut Removal

Unscrew the stock retaining nut.

Stock and Shim Removal

Remove stock, nut, washer, plate, and shim.

New Drop Kit Installation

Install new drop kit plates and shims.

Shim and Plate Placement

Place shim on recoil spring tube, aligning parts correctly.

Barrel and Stock Alignment

Interchangeable Rib Barrels

Rib Removal Procedure

Unscrew and remove the rib-barrel fixing screw.

Rib Screw Removal

Rib Removal

New Rib Installation

Internal Choke

Internal Choke Removal

Unscrew and extract the internal choke.

Choke Seat Cleaning

Internal Choke Reinstallation

Choke Identification

Notches

Front markings on choke tubes for identification.

Symbols

Symbols on choke tubes for identification.

Choke Markings

Choke Symbols

Related product manuals