To Next PageTo Next Page
Need help?Do you have a question about the BENETEAU OCEANIS 473 and is the answer not in the manual?
Details hull length, beam, draught, air draught, and maximum authorised engine power.
Defines design categories (A, B, C, D) with corresponding wave height and wind strength.
Lists the maximum number of persons allowed aboard for each design category.
Details the load sheet for different design categories, including light boat, safety equipment, and maximum laden displacement.
Instructions on fastening safety harness lines, closing hatches, and securing washboards before sailing.
Ensuring self-bailing holes are not obstructed for proper water drainage.
Details sail areas for mainsail, genoa, and spinnaker, including standard and furling versions.
Lists cables for standing rigging with their diameters (shrouds, forestay, backstay).
Diagram and list of running rigging components for standard mast and spinnaker option.
Diagram and list of running rigging components for in-mast furling and spinnaker option.
Illustrates the mainsail tackle and the system used for reefing the mainsail.
Lists freshwater and black water tank capacities, fillers, vents, pumps, and filters.
Provides operating instructions for the black water system, including cleaning and discharge precautions.
Diagrams illustrating the layout of freshwater and black water tanks and associated plumbing.
Lists components of the bailing system, including electric and manual bilge pumps, filters, and outlets.
Instructions on checking the bailing system's operation, pump location, and strainer cleanliness.
Guidelines for opening and closing seacocks, emphasizing closure before putting to sea and after each use.
Lists and describes various seacocks and skin fittings, including toilet, engine, and sink outlets.
Covers safety advice for both 12V and 110V/220V electrical systems to prevent shocks and fires.
Diagram of the 12V electrical panel and a simplified wiring diagram for the main systems.
Detailed list mapping reference numbers to 12V lights and appliances and their panel functions.
Table detailing 12V functions, their reference codes, and required amperage.
Diagrams illustrating the layout of the 110V/220V system components, including shore power and water heater.
Safety advice for gas stoves, covering fire risks, ventilation, and handling flammable materials.
Precautions for changing gas cylinders, checking regulators, and using flexible hoses.
Instructions for safe operation, fuel storage, and handling for the alcohol stove.
Diagrams showing the location of the gas locker, valves, and ventilation system.
Ensuring the emergency tiller is accessible and understanding its function for steering.
Recommendation to check the tension of steering cables annually for proper system function.
Safety measures for refueling, starting, ventilation, and fire suppression in the engine compartment.
List of engine components with reference numbers for identification in installation diagrams.
Diagrams illustrating the engine installation, including key components and their placement.
Advice on contacting the Beneteau dealer for maintenance, repairs, and spare parts.
Diagram showing correct placement of cradle pads and lifting slings for safe hauling.
Guidelines for maintaining the hull, including gel-coat care, epoxy paint, and antifouling application.
Covers maintenance for teak woodwork, plexiglass, and the steering system.
Provides advice on interior cleaning, freshwater system sterilization, and engine servicing.
Detailed procedures for decommissioning the boat for winter, including interior and exterior protection.
Guidelines on waste oil disposal, spill avoidance, and toilet usage in harbours.
Advice on using biodegradable detergents and proper disposal of rubbish to protect marine life.
General