Benjamin Heating products FS140 User Manual

A DIVISION OF
V/.R. BENJAMIN
PRODUCTS LIMITED
HEATING PRODUCTS
OWNERS MANUAL
MODEL
FS140
IS CERTIFIED TO:
UL391
UL727
Unit Serial #
1
CSA B140.4
CAN/CSA B366.1
CSA B212 (EEV)
Burner Serial #
Purchased From
Company Address
Name of Installer
Installer Telephone #
Date Installed
IMPORTANT
This manual must be given to the homeowner. Please read the warranty and return the warranty
card to initiate coverage.
We Strongly Recommend The Use Of A Carbon Monoxide Detector When Using Any
Product That Consumes Fossil Fuels.
It is the responsibility of the person or company installing this furnace to verify before the installation that the
furnace certifications shown on this page, meet or exceed all local, state and regulatory requirements for installation
and use of this furnace. Failure to do so voids all claims and warranties.
June 2006 Aussi disponible en Francais.

Benjamin Heating products FS140 Specifications

General

Brand	Benjamin Heating products
Model	FS140
Category	Burner
Language	English

Summary

Installation and Clearances

Chimney and Smoke Pipe Requirements

Specifies requirements for chimney type, size, and smoke pipe installation.

Oil Section Installation Instructions

Step-by-step instructions for installing the oil burner and related components.

Minimum Installation Clearances

Outlines required clearance distances from combustible materials.

Operation and Safety Procedures

Normal Furnace Operation

Describes normal cycling and operation for both wood and oil modes.

Wood Firing Instructions

Guidelines for using the wood burning function, including fuel and safety.

Handling Out-of-Control Fires

Steps to take in case of excessive fueling, soot, or draft issues.

Flue Fire Procedures

Steps to take in case of a chimney or flue fire.

Oil Section Operating Instructions

Detailed instructions for operating the oil burner.

Starting the Oil Burner

Troubleshooting Oil Burner Failures

Cleaning and Component Replacement

Furnace Cleaning Procedures