Need help?Do you have a question about the Bennett & Ross TT-1012 and is the answer not in the manual?
General| Motor | DC motor |
|---|---|
| Platter Material | Aluminum |
| Phono Output | Yes |
| USB Output | Yes |
| Type | Belt-drive turntable |
| Speeds | 33 1/3, 45 RPM |
| Line Output | Yes |
| Built-in Phono Preamp | Yes |
Specifies the intended and safe operational uses for the turntable, outlining conditions to avoid.
Provides essential safety precautions to prevent hazards, damage, or injury during operation and placement.
Explains the wiring and pinout for connecting the cartridge to the tonearm headshell.
Instructions for correctly installing the turntable platter and drive belt.
Guides the user through achieving the correct horizontal balance for the tonearm.
Describes how to use strobe dots to accurately measure and verify the platter's rotational speed.
Details the steps to safely conclude a record playback session and stop the turntable.
Explains the USB connection process between the turntable and a computer for recording.
Provides instructions for installing and using Audacity software for audio recording.
Instructions for enabling and pairing the turntable's Bluetooth transmitter with a receiver.
Explains how to send audio signals from other devices to the turntable via Bluetooth.
To Next Page