Quickstart Functionality Guide
Need help? We’re here for you.
Mon.-Fri. 8 AM - 5 PM (EST)
(954) 427-1400
ELECTRIC
ATP81 5010694 r040720
Storing and Activating Favorite Settings (Manual pg. 25)
To use AutoTrim Pro in AUTO mode, you first need to set a
“Favorite” setting. Manually adjust the trim tabs, throttle, and engine
trim to attain your desired pitch and roll attitude. Next, press and hold
the FAV1 OR FAV2 button for 5 seconds (or more). Once released,
the blue LED will illuminate, and the system will immediately
go into AUTO mode. Pressing any other button on the control
will deactivate AUTO mode putting you back in manual control.
Reactivate the FAV setting any time with a quick button tap.
Favorite settings can be updated any time repeating these steps.
Or FAV2
Auto Trim
Activity Indication
LEDs alert you
to the automatic
movements of the
tabs in real time.
You can see exactly
what adjustments
AutoTrim Pro
is doing for you.
Tabs “All Up” or “All Down” (Semi-automatic)
Fully retract or deploy tabs with a single touch
in manual mode whenever needed.
Adjust LEDs:
Dim (Moon) or Brighten (Sun)
Tab Position
Indication
Shows the current
position of the
trim tabs
in manual and
automatic mode.
Favorite Settings
(Automatic)
Store and
activate two
“Favorite” pitch
and roll settings
to automatically
achieve your
preferred cruising
attitude.
Trim Tab Controls
(Manual)
Override
automatic mode
with a touch to
take full manual
command of the
trim tabs.
Control/Display Overview
ATP-N2K-Electric-Quickstart.indd 1ATP-N2K-Electric-Quickstart.indd 1 4/8/20 9:56 AM4/8/20 9:56 AM
To Next Page
Need help?
General
