43 Navigating the main menu
Customer
Key 1
Sets the function to be accessed by custom key 1. • Picture Mode
• Display Mode
• Brightness
• Contrast
• Auto
Adjustment
• Volume
• Mute
• Input
• Eye Protect
• Eye Protect
Meter
• ECO Sensor
• ECO Sensor
Meter
• Smart
Reminder
Customer
Key 2
Sets the function to be accessed by custom key 2.
Customer
Key 3
Sets the function to be accessed by custom key 3.
DDC/CI Allows the monitor settings to be set through the software
on the PC.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards Association
(VESA). DDC/CI capability allows monitor controls to be sent via
the software for remote diagnostics.
• ON
• OFF
DP Auto
Switch
When this function is activated, DP port will be in the
input auto select loop. Otherwise, DP can only be selected
by input select or by hot key.
•
ON
• OFF
Auto Power
Off
Sets the time to power off the monitor automatically in
power saving mode.
• OFF
• 10min.
• 20min.
• 30min.
Resolution
Notice
Sets whether to display the resolution notice of the
recommended resolution when a new input source is
detected by the monitor.
• ON
• OFF
Information Displays the current monitor property settings.
• Input
• Current
Resolution
• Optimum
Resolution
(best with the
monitor)
• Model Name
Item Function Range
To Next Page
Loading...
