11 How to assemble your monitor hardware
2. Remove the monitor stand.
Slightly push the hinge cap on the upper part of the
monitor stand toward the monitor as illustrated. The
cap shall be released.
Use a a cross-pointed screwdriver to release the
screws that fixing the monitor stand to the monitor.
The use of a magnetic-head screwdriver is
recommended to avoid of losing the screws.
Then pull the monitor stand backward away from the
monitor.
In case you intend to use your monitor on the stand in the
future, please keep the monitor base, monitor stand, and
screws somewhere safe for future use.
3. Follow the instruction manuals of the wall mount
bracket you purchased to complete the installation.
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General
