73 Operation (under non-Launcher source)
Volume Adjusts the sound level.
Light Mode See Setting the Light Mode on page 84.
Information
• Native Resolution: Shows the native resolution of the projector.
• Detected Resolution: Shows the native resolution of the input signal.
• Source: Shows the current signal source.
• Picture Mode: Shows the selected mode in the Picture menu.
• Light Mode: Shows the selected mode in the Light Settings menu.
• 3D Format: Shows the current 3D mode.
• Color System: Shows input system format.
• Light Usage Time: Shows the number of hours the lamp has been used.
• Firmware Version: Shows the firmware version of your projector.
• Service Code: Show the projector’s serial number.
Menu Type
Switches to the Advanced OSD menu. See Using the projector menus under
non-Launcher source on page 63.
To Next Page
Loading...
