BenQ EX2710Q - Page 3

3
English
Introduction
Display QuicKit is a software utility that helps to update BenQ monitor’s rmware easily.
An updated rmware helps to improve a monitor’s stability and compatibility, though it
erases all the customized settings and resets the monitor.
Note that not all BenQ monitors work with this software utility. It checks the compatibility
of your monitor automatically once launched.
Warnings
When performing rmware update, pay attention to the following:
• Always use the utility provided by BenQ and follow the procedures described in this
document to complete the rmware update.
• Keep stable power supply to the product until the update is complete. Do not remove
the power adapter (if supplied) or disconnect the power cord and the cables.
• Do not power off the monitor.
• Connect only one video source to the monitor. See “Connections” on 4 for the con-
nections.
• You can update the rmware of one monitor at a time. If you have multiple monitors
connected to your computer, keep one monitor and disconnect others rst. Take turns
until all monitors are updated.
Failure to follow these warnings will result in rmware update failure and possible damage to the
product.
System requirements
• Windows 10 32/64 bit
• Windows 11
• MacOS 12 or above (Software availability varies by monitor model. Check if a
Mac version of software is available from Support.BenQ.com > model name >
Software & Driver.)