42 How to choose the right Refresh Rate
How to choose the right Refresh Rate
You don't have to choose the highest possible refresh rate on an LCD display, because it is not
technically possible for an LCD display to flicker. The best results are obtained by using the factory
modes already set in your computer. There is a table with the factory modes in this user’s guide.
Youc an choose 60, 70 and 75 Hertz, (but not 72Hz) for the native resolution of 1600x1200. In
Windows 95/98/2000/ME/XP you can change the refresh rate as follows:
1. Double click the “Display” icon in the Control Panel.
6
To Next Page
Loading...
